Best-selling children’s vacuum has finally been given a new name: Simplicity Vacuum.
In its first year of sales, the SV has been recognized as the world’s best-selling vacuum, topping all other children’s vacuums by more than $3.3 million in the United States.
The new name is part of the brand’s attempt to appeal to parents who might not want to buy a vacuum at a premium.
“It’s a great brand name for the vacuum, and it is, in a way, the best vacuum,” says John B. Stiles, president of The Surgical Supply Company, which owns The Surgiks.
“We’re hoping it will be a hit with families.”
Simplicity’s new name has a little bit of everything: simplicity, simplicity, and, of course, the vacuum.
Simplicity is designed to appeal directly to parents of small children.
It has a single-seater model with two different sizes of plastic tubes (two sizes in each tube), and two different modes of cleaning: “Simple Clean” and “Simplicity Clean.”
Both modes are clean by default, but users can also choose to clean the entire tube (including the two smaller plastic tubes) or simply remove all of the tubes.
Users can also remove a single tube or two.
The Simple Clean mode cleans the tubes with the vacuum’s pressure, while Simplicity Clean removes all of them.
The two-seaters model, with two tubes, has one of two settings: “Basic Clean” or “Full Clean.”
In both modes, users can change the cleaning process to “Full” (the default setting), “Basic” (cleaning the entire vacuum) or “Basic,” “Full,” or “Clean.”
Users can choose the settings they prefer.
The other setting, “Full/Simple Clean,” allows users to remove a tube or remove the entire filter from the tube.
“With these two settings, you can really go in and just clean and clean,” says Bostrom.
The vacuum’s design is simple: it has two large tubes (one with a single plastic tube and one with two separate plastic tubes), with one large filter and one small filter.
It’s designed to be used with a spoon or a vacuum cleaner.
The small filter on the bottom of the tube is used to separate the plastic from the plastic tubes.
The plastic tubes are separated by a plastic filter, which is sealed by a polycarbonate lid and is designed for easy cleaning.
The tubes and filter are held in place by a vacuum-like, rubber seal that prevents them from moving.
The lid, also made of rubber, has a locking mechanism that holds it in place.
A small clip holds the filter in place on the tube while the filter is being cleaned.
When the filter’s filter is clean, the filter can be removed from the vacuum and the tube can be replaced with the filter.
If a filter is removed, the tube will be pulled out and the filter replaced with a new one.
The filter’s size is controlled by the filters size button.
It can be used to change the size of the filter by clicking the small button.
The top part of each tube is made of a rubber-like material that has been shaped to help hold the filter and prevent the tube from moving while cleaning.
There is a large plastic cap at the top of the lid, which sits against the tube, protecting the filter from air.
The bottom part of a tube is designed with a small rubber cap that sits on top of it.
The cap has a small hole that lets air pass through the tube and the cap’s rubber-type coating allows it to breathe.
The caps can be easily removed.
When a user cleans a vacuum with a brush, the brush is held in a slot in the lid and then pulled out with a tiny screwdriver.
When it comes time to clean a vacuum again, the cap can be pushed down into the slot, leaving a vacuum in place, and then a new filter can come out of the slot and the vacuum is back in place again.
In this photo, you see the filter on top and a filter on bottom.
The main body of the Surgius is made from polycarbonates, which are designed to absorb and hold odors and other contaminants.
It is also designed to reduce the amount of moisture that enters the vacuum by absorbing the odor and other gases.
The SV’s handle and cap are made from stainless steel, with a silver coating and two rubber-colored pads on top.
It features a rubber seal around the handle and a locking design to keep the filter sealed.
The handle has a silver finish and has a slot on top for holding a filter.
The rubber pad on the top has a rubber liner that is used for holding the filter, and the plastic pad on top has another rubber liner for holding it in the slot.
The handles and